Double to Simple to Double Again

by GregoriNiculitcheff in Workshop > Tools

1928 Views, 1 Favorites, 0 Comments

Double to Simple to Double Again

I made it at Techshop
:)

That is "Teeth Brutalis" our table saw at Techshop

She love bite acrylic, plastic and wood

Let's Turn Off the Machine

Remove the Key

Remove the Screw

And Take Out..

Gorilla Tork to Release the Screw

Remove Washer and Nut

Remove Double Saw

Press the Lock

And Open the Side Door

Lift the Locker Arm

And Release the Saw Stop Key

Remove the Saw Stop

Take the New Saw

Place in the Axel

Washer and Nut

Gorilla Tork

Lift the Lock Arm

Open the Side Door

Get the Stop Saw Device

May Be Clean the Place First

Place Stop Saw Device in the Suport

Lock the Key

Lock the Arm

Put the Plate and Lock It

Close the Side Door

And Lock It

Very Well

Than the Saw Is Ready to Use :)

But May Be Now You Want Return to Double Blade Again...

2012-09-25_11-50-13_593 (1).jpg

Than simply go backward in this Instructable

or

... keep moving forward

Turn Off the Machine and Remove the Key

Lift the Locker

And Remove the Guard

Gorilla Tork

Remove Washer and Nut

Remove the Saw

Get the Double Saw

Put in the Axel

Washer and Nut

Gorilla Tork Again

Unlock the Side Door

And Open the Side Door

Remove the Saw Stop

ATTENTION:
Only when you go from small to big size saw you can remove the Stop Saw AFTER change the saw, otherwise
When you go to small to big diameter saw YOU NEED REMOVE THE STOP SAW FIRST

If you try to do in the wrong way
You will figure out immediately because "Two bodies can not occupy the same position in the space in the same time"

:)

Take SawStop From the Box

Place in the Support

Tie the Key

SawStop Done :)

Close and Lock the Side Door

Put the Plate

And Screw It

Put the Key and Turn on the Machine

And You Are Ready to Go Make Cuts or Engrave? With Large Width

:) I made it at Techshop