Dowel Arrows
These arrows are made for my pvc bow I have an instructible on
Supplies
1 dowel rod 69cents
Electrical tape/ duct tape
Saw
Knife
Shaft
The dowel makes two arrows. Cut it on half with a hacksaw. Try getting the cleanest cut possible
Notch(I Think It's Called That)
Just find the end of the arrow. Cut straight down from the middle with your saw about a centimeter
Fletching
Cut a 2 1/2 inch piece of duct tape or electrical tape. Set it parallel to the notch about an inch from the notch. Do it to the other side. Push sides together. Cut out shape of fletching u want on both sides.
Tip/head
Next, sharpen the end. Or cut heads out of sheet metal and glue it in place. Sorry I don't have pics. If u sharpen it garden it in fire
Finished
Now ur all done. Check out my bow instructible that these arrows r designed for