Draw a 3d Monogram Pendant for 3d Printing

These pendants make great gifts and are 3d printer friendly.

I have numerous letter combinations available for download at http://www.thingiverse.com/Ugly/designs

In your favorite 3d modeling tool create a 2 character text; your initials are a great start.

Text height 25 mm

Text only needs to be a curve (outline).

Note: Use a font that has the same height for each letter and not to curvy.

Rotate one of the letters 90 degrees to the other letter

Center the letters. Make sure that the bottoms are also aligned.

Extrude each letter separately the same width of the other letter.

Do a boolean intersection of the two extruded letters.

Add a cylinder 3mm in diameter thru the center of the monogram.

Subtract the cylinder from the monogram.

Upload to you 3d printer, print, and enjoy!