Drawer Front Panel

by leszek.leszczak in Workshop > 3D Printing

309 Views, 5 Favorites, 0 Comments

Drawer Front Panel

fusion.JPG
20210102_140101.jpg

Modeling in Fusion 360.

Setting Every Thing Up .

cura.JPG

I use Cura . Because of the size printing in two pieces. Material is PETG

Printing in 225 Celsius

20210102_022326

The printing process takes approx 4hours each piece.

Here Is the Result :)

20210102_123748.jpg
20210102_125202.jpg
20210102_140034.jpg

First Drawer done. Four left