Drawer Organizer

Use Amazon boxes and give them a new purpose with this drawer, which can be used to organize anything.

Materials

*Larger box

*Extra boxes

*Exacto knife

*Scissors

*Glue

*Sharpie

Choose a larger box and smaller box that approximately fits inside. Using the larger box we will create the base for the drawer organizer.

Trace the top and bottom twice, so you end up with four big squares.

Only trace the sides once. For Side 1 and Side 2 cut two slits at the end and cut.

Trace the back of the smaller box with a sharpie on the front of the larger box.

Using an exacto knife cut the opening.

Glue the traced and cut pieces to corresponding sides of the box. For Side 1 and Side 2 fold over flaps into the opening of the base.

With excess cardboard create drawer slides by cutting two rectangular pieces and fold in center. Glue to bottom sides of the base.

Materials

*smaller box

*exacto knife

*recycled travel size bottles

*Duck tape

*Sharpie

*Scissors

*Glue

Using an exacto knife cut an opening for the drawer.

If the smaller box does not fit into base opening adjust by cutting off part of the front and back. DO NOT cut bottom flap!

Use the flap to rebuild drawer frame.

Cut small incisions for drawer knobs into the front of the box. Push travel caps through the incision a screw in place. Add glue to secure if needed.

To give a cleaner finish cover inside of the drawer with a tape of choice.

You can stop now or customize as you want. I chose to spray paint my drawer and color my knobs with acrylic paint.

Drawer organizer which can be used for the desk, nights stand, or even clothes!