Driving a Manual

by adambrown21 in Circuits > Audio

64 Views, 0 Favorites, 0 Comments

Driving a Manual

download.jpg

(This is the pickup I used)

The Clutch

IMG_2884[1].JPG

The clutch is the third pedal to the left.

The Gear Selector

IMG_2885[1].JPG

this is the gear selector it lets you pick the gears

Finding Where the Clutch Engages

You can see where the clutch engages because the rmps go down. Once you know where the clutch engages you can release it faster.

Downloads

RPMs Needed to Start From a Stop.

You will need very little rpm to start from a start, as you can see in the video i only go up to 1 thousand rmps before i let the clutch all the way out.

Shifting Gears.

Shifting gears is very important. When sifting from any gear to a higher one you push the clutch all the way in put the car into a higher gear then let out the clutch.

Slowing Down and Stoping.

slowing down and stopping is basically the same as a automatic car. You need to push the clutch in and then take the car out of gear and push down on the brake.

Downloads