Duct Tape Belt

How to make a cheap belt with things you find around the house. I made this belt one day when my old belt was starting to wear out, it is easy and doesn't take much to make.

For this instructable you will need:
1 roll of duct tape
1 Pair of scissors
1 pen
1 ruler
2 key chain rings

Measure the tape out to fit your waist. You will need to double the amount. Fold over its all but the last 1 inch.

get you ruler and measure how thick you want your belt all the way down. i made mine 3CM but you can make it bigger or smaller.

Cut the Tape along the line you just made.

If your belt is as thick as mine you will need to cut the end so that the rings will fit.

Slide the key chain rings on the end and fold it over.

You now have a belt. to put it on you need to put the end through both rings then bring it around the top ring and through the bottom.