Duct Tape Bow

Supplies You Will Need:
1. At least one role of duct tape
2. Xacto knife
3. Possibly scissors
4. Ruler
5. Lastly a cutting mat

First cut one strip of tape at 6in long and another one at 6 1/2 in long

Cut your 6 1/2 in strip at the 1 1/2 in and at the 1 3/4 mark and one SHOULD be smaller than the other

Set your two little strips aside for now.

So now what you do is flip up your 6 in piece over sticky side up

Then take your 6 1/2 in piece and put it right on top of your other piece MAKING SURE there IS sticky on top, bottom and on one side.

Then fold over all of the top and bottom but NOT on the side

Take your xacto knife and cut the sticky in a triangular shape and scrap the scraps

Now just fold over the other side onto the stickiness

Fold and crease the sides but make sure where you folded it over it is in the center

Now take your smaller strip and put it right on the seam in the middle and fold it all around your bow

Now crease your bow like this, it's kinda hard to explain in words

Just wrap your last strip around the middle

You can puff out the sides this is what I like to do but you don't have to

You can also puff it this way but I don't like to

NOW YOU ARE DONE!! Enjoy your bow