Duct Tape Binder!

Have an old, falling apart binder? Or do you just want to add some style to you your school supplies? This tutorial will help you reuse your old binders and make them one if a kind!

A binder Some duct tape Optional:scissors

Measure a strip of duct tape to the INSIDE of your binder. It's good to start in the inside because then there will be no loose pieces on the outside when you finish. If you have a pocket on the inside measure to the pocket first.

Add more strips to the pocket

Now we get on to the bigger part of the binder. Take a strip of duct tape and measure it to the rest of the inside.(make sure it overlaps the top an the pocket a little).

Tick the remainder of the tape underneath the pocket and wrap the top around to the front.

Do the same all the way down the binder

Do the same thing to the other half of the binder.

The front is probably a little covered already but we will cover it all the way. Take your duct tape and cover the front. If there is extra, make sure you only fold on the TOP not the bottom because then there would be random colors on the pocket.

Do the same to the other side

You can use regular pieces for the middle but it makes the binder close wierd. Take a strip as long as the binder and cut it in half. The pics should explain the rest.

Add your own design to it! It doesn't matter what it is just be creative

Thank you for taking the time to look at this instructable! Please favorite and follow :) --moskiii13