EARTHQUAKE ALARM Using the KY-002

Hello peoples! Here i am again.

This time i made a Basic earthquake alarm with the KY-002 Shock sensor.

Its can be used for multiple purposes, Like most sensors. In this case we use it as a earthquake sensor.

Check the following step for Schematic and code.

Parts list:

1. Arduino uno, I used the RobotDyn uno, a chinese copy with 7 analog pins. VERY GOOD!
2. Shock sensor Ky-002
3. 3 Color RGB Led ky-016
4. Buzzer
5. SET of Jumper wires. MM FF FM

Good Luck building it. Its done in a few minutes!

Ciao!