EASY FIDGET SPINNER

THIS IS A EASY METHOD OF MAKING A FIDGET SPINNER. IT TAKES ONLY TEN MINUTES TO MAKE THIS GUY(TIME FOR DRYING(NOT INCLUDED)).

EASY PEACE OUT!!!!!!!!!!!!!!!!!!!!!!

1, Transparent polyester resin

2, Blue food coloring LINK: http://bit.ly/2uuMlIO

3, A4 SIZE PAPER

4,Compass (Drawing Tool)

5 ,608 Skate Ball Bearings LINK: http://amzn.to/2t1QLCV

6,Plexy Glass /Acrylic Sheet LINK :http://amzn.to/2tWI8dV

7, Glue Gun LINK :http://amzn.to/2voidLK

DRAW THE BASE OF THE FIDGET SPINNER IN A PAPER AND CUT IT AS SHOWN IN THE VIDEO.

CUT THE ACRYLIC SHEET IN THE WIDTH OF YOUR SPINNER BASE AND CUT IT!!

CUT THE ACRYLIC SHEET IN THE WIDTH OF YOUR BEARING, LIKE SHOWN IN THE PICTURE.

THEN CUT 3 MORE PIECES LIKE THAT.

THEN STICK THOSE PIECES IN YOUR BOARD WHICH YOU HAVE CUT IN THE FIST(WITH THE WIDTH OF YOUR SPINNER)

MIX YOUR TRANSPARENT POLYESTER RESIN WITH WATER.

ADD FOOD COLOR TO YOUR MIXTURE.

POUR THE MIXTURE TO THE BASE WHICH YOU CREATED WITH ACRYLIC SHEET.

LET IT DRY!!!

AS THE RESULT YOU WILL GET SOMETHING LIKE IN THE PICTURE ABOVE.

TAKE THE PAPER BASE AND KEEP IT ON THE RESULT AND TRACE IT.

(EVEN THE LINES(WHICH ARE FOR THE HOLES)).

DRILL THE HOLES FOR YOUR BEARING

SAND THE EXTRAS AND MAKE IT IN THE SHAPE.

STICK THE BEARINGS IN.

YOUR DONE. ENJOY WITH YOUR FIDGET SPINNER