Eagles Ornament/Trinket
This instructable is a spinoff of myDIY Linux Fish Ornament DIY Linux Fish Ornament, except for a different venue, making an Eagles team logo ornament for my sports fan brother.
Please rate this if you like it. Thanks!
Please rate this if you like it. Thanks!
Bust Out Your Solder and Soldering Iron
For this project, you will need:
-Solder (or some kind of wire)
-Soldering Iron
-Needle nose pliers
-A Dremel or sandpaper
Heat up your soldering iron while you get the basic shape bent into place. I used a pic from google images to get the basic form down. Once it's bent, solder the two ends together. I do my soldering jobs on the back to keep a neater front.
-Solder (or some kind of wire)
-Soldering Iron
-Needle nose pliers
-A Dremel or sandpaper
Heat up your soldering iron while you get the basic shape bent into place. I used a pic from google images to get the basic form down. Once it's bent, solder the two ends together. I do my soldering jobs on the back to keep a neater front.
Add the Features to It
Look for the fine points of the pic and lay them out on the first, eagle shape. Solder them into place. I suggest wearing gloves because the solder/wire gets hot!
Finish!
Finish up your soldering and sand down the sharp points! Add a bit of string, and there you have it!