Easy 6-Step Pledge Glitter Ornaments

Make your own sparkly ornaments in 6 easy steps.

Pledge Floor Care Wood Floor Finish

Clear ornaments

Glitter

Funnel

Pledge Floor Care Wood Floor Finish (It may be BLUE or YELLOW, just make sure it’s wood floor FINISH and not cleaner.)

Clear ornaments (Glass or plastic ornaments both work- you can even use different shaped ones.)

Glitter (Fine works best.)

Funnel (A piece of paper rolled into a cone shape works well.)

View Image 1

Remove the ornament cap and squirt about a tablespoon of the Pledge into the ornament. Swirl the Pledge around and make sure you get a good even coat over the entire inside of the ornament. Pour any excess Pledge back into the bottle (or discard).

View image 2

Insert your funnel into the top of your ornament and pour in glitter of your choice. I have found that fine glitter works best. You will need a few tablespoons and you can always add more if necessary.

View Image 3

Coat the inside of your ornament with the glitter. I found turning the ornament around helped to ensure good coverage, but you can shake the ornament too. Just make sure to cover the top of the ornament with a towel and your thumb so you don’t cause a glitter explosion!

View image 4

Pour the excess glitter back into the container. Tap the sides of the ornament a little to get any loose glitter out. You don’t want to leave a clump of unstuck glitter in the bottom of your ornament.

View Image 5

Pop the top back on your ornament! That’s all it takes!

View Image 6