Easy Bamboo Ring From Scratch

Hi, I'm Craftygreenguru, 13 years old. Today I'm going to show you how to make a great looking ring the easy way.

Bamboo
Cross cut saw or metal saw
80 grit sand paper
Decorating supplies of your choice

Take your lovely piece of bamboo and mark it so you cut straight!!
When you have marked it take a thin saw to cut the bamboo, becareful,go slow so it wont break!

You could use any type of sandpaper, but about 80 grit works best. Roll it into a cylinder shape and sand the inside, then sand the outside of your ring

You can do your own decorations. Try making markings or draw on your ring
Or if you don't have imagination go to step 4

Take old charger, cut it open and use the copper wire to wrap around the ring.

Take that chargers wire again and wrap over the ring.
Take a long piece of wire and make it double, tie it to the ring and voilla, magic, you have a necklace!!

Or try doing them all together
Well there you have it your ring or necklace.😉
Now Go show off, and remember to mention how difficult it was to make.