Easy Craft Mosquito Net Structure

In this instructable, I show you the easiest, cheapest and reusable way to craft your mosquito net structure, making an improvement in your house. In 4 simple steps.

• Measure Tape;
• Wood Strips (to make a total area);
• Screws;
• Wood Driller;
• Wood Saw;
• Mosquito net (reused);

Use your measure tape, and know the height and length.

• Put the wood strips one on top of the other and drill a hole smaller than the screw;
• Then Screw the woods together making the structure;

• Put some woods/wood strips corners to give more structure;

The Structure should look like the images

• Start rolling the net on the wood, from one corner to the other and stretching the net.

Note: You and use a stappler to secure the net, in my case the uncutted wood makes the areas perfect to secure the net, just by rolling the net on the structure)