Easy Homemade Screwdriver Holder

Homemade screw driver holder with available wood (recycling)

to build this holder you need ; 3 small wood plates, a drill, 10mm drill bit, a saw, some screws.

these are the steps:

Step 1: cutting the small wooden plates.

Step 2 : drill the horizontal plates.

Steps 3 : assemble the elements.

Step4 :finishing and puting the screwdrivers.

Using a saw cut the plates at the dimensions indicated in the pectures.

Drill the horizontal plates every 5 cm.

Assemble the horizontal and vertical panels with glue and screws.

With sandpaper (grit 120) finish the work to get a soft surfaces.

then put your screwdrivers!