Easy PPE Face Visor

by m0thm in Living > Health

238 Views, 0 Favorites, 0 Comments

Easy PPE Face Visor

93418575_236741690896637_1638744071709130752_n.jpg
93950657_213090546657359_3921203032695504896_n.jpg

First I can not take credit for this. This is most definatly my Dad's idea, I am just providing the 'tech support'.

Second ENSURE CABLE TIES ARE THE RELEASE TYPE!

Use at your own risk etc.

Supplies

A4 Laminate pouch.

3 × 250mm × 7.6mm re-useable cable ties.

26mm strip off A4 card, marked on centre line 15mm & 35mm from each end.

94040607_518984132127991_8796494374016909312_n.jpg

Place strip of card in laminate pouch. ( You could personalise the card before hand if you wish)

94640780_939733673133204_3736788638927683584_n.jpg

After laminating, punch holes or cut slots where marked.

94029114_173493007145931_4594038362880344064_n.jpg

Place first cable tie through inner hole/slot.

94573133_1304348013287155_2702424363587600384_n.jpg

Place second cable tie through outer hole and connect those two as shown.

94491796_3052413471468802_7542961314881077248_n.jpg

Place first cable tie through other inner hole and connect to third cable tie as shown.

93886930_524859398176380_5034679746634448896_n.jpg

Place first cable tie through other inner hole and connect to third cable tie as shown.

94081325_3043307262399025_3571031226611400704_n.jpg

Now connect second cable tie to third.

93418575_236741690896637_1638744071709130752_n.jpg

Now place on head and adjust cable ties to fit snug.

I suggest not trimming ends off cable ties until 100% sure of best fit. Do not trim the rear cable tie.