Ecological Bike Fender

Lets make a bike fender with reused materials.
Its GREEN, its EASY, its FAST and its USEFUL.

U will RECYCLE:

1 pet bottle
1 useless mouse cable

1-Pick the PET bottle and cut it in the half excluding the top and the bottom,
2-Round the corners.
3-Make two tiny parallel cuts one near the middle up and the other in the middle donw...(this holes are to pass the wire or the strip that will fix into the bike frame).

3-pick the useless mouse cable and strip out the internal copper wire to use it to fix on the bike downtube and rear rack. (save the rubber cover its can become a very useful elastic rope)

PS: I used some christmas propaganda blue nylon strips (very common in Brazil due to religious traditions(not this case)) in the rear fender. The cuts I made passed more fit the strips and tied even better than the copper wire from the front. I used some fire in the nylon ends.

4-Now UR ready to drive dry, green and happy cause :

-You help enviroment moving with your bike

-Your fender with no cost is even lighter than the commercial ones (u can apply some paint to fashion it but i prefer this recycle style ...save even more petroleum from the paint)

-My mamma broke the bottom of this tupperware while I was making the photos, I fixed the bottom and added some wire to join the cover and got a PICNIC tupperware. Putted it all together with the elastic and very strong cable from the mouse.

-Now pick the junk u made and take to recycle.

PS- save the fancy mouse ball =)
PS2- Thanx mommy and bro in concept, design and everything else....