Electric Nail Filer/Cutter
by ankushvenkatesh666 in Workshop > 3D Printing
459 Views, 4 Favorites, 0 Comments
Electric Nail Filer/Cutter
Automatic/Electric Nail Filer/Cutter
You Will Need
A DC motor
Emery Head/Cylinder(can be found online or at hardware stores)
3D Printed connector part
Battery Holder
Connect and Assemble
The 3D printed piece(grey) connects the motor and the emery head.
Connect the motor using wires to the battery connector after inserting the batteries.
Voila! You have an electric nail filer/cutter.