Electric Ignitor Match Bomb!!!

This will show you how to make a match bomb with an electric ignitor and it's quite loud when you have mastered the techniche.
i haven't got images but if you can't follow i will eventually post a new one with images.
Oh and it's safe because you can the length of the wire as long as you want!!

You will need:
electric wire.
About 21 matches.
a straw.
a battery over 9 volts.
scotch tape.
a napkin.
alluminum foil.
steel wool.
and scisors.

You can use this ignitor style to make your own bombs that you invent.
Ok first of all you will need 1 match, steel wool, scotch tape and electric wire.

Cut three inches of scotch tape or more an role aroun the match about two full spins, and then get the steel wool and place one side wraped aroun the tape and two more full spins and then do to the other the same thing and make sure it goes over the maches gun powder and the steel wool doesn't touch it's self!
and the secure the electric wire to the ends of the steel wool, again without touching. make sure the bettery isn't allready connected.
and it's done!!!

now get the ignitor allready on the side of the table coz you will need it soon.
and now cut 10 cm of the straw and stuff the ignitor on one of the sides, it has to be very tight, if it isn't use some napkin to secure it.
and then scrape the gun powder of the matches and into the straw, 20 matches don't forget, and when you've finished compact the gun powder very well, not fastor it will explode in your hand, just slow strong movements.
and the feel the side of the straw to make sure it's compacted if it is'nt just do that again.

Now role a ball of alluminum foil a bit wider than the straw an shuff it in with help of something, i use another match, make it very tight the tighter the louder and stronger and now put another alluminum foil ball to make sure it's tight.
and now role scotch tape starting one inch from the electric wire and role it up the straw and cut the exess straw and continue roling until the straw if completely covered.

And there you go your bomb is finished.
just go out side and connect each side of the wire to your battery and it will explode

if your bomb doesn't go off, it probabilly is the ignitor that isn't good so just make a new one or try to see of the steel wool isn't touching.
those are the only problems that happened to me.