Enables DIY Display Booth
A quick guide on purchasing and assembling Enable's Display Booth.
Step 1: Shop for Hardware
Get the necessary supplies form your local hardware provider.
Step 2: Cut the Pipes
Cut all four of the 10'-0" pvc pipes in half. You will end up with eight 5'-0" lengths.
Take two of the 5'-0" lengths you just cut and cut them in half. You will end up with four 2'-6" lengths.
Home Depot will cut these for you when purchasing in the store.
Step 3" Layout Your Pieces
Layout your pieces as shown.We will assemble the three main areas:
- Top
- Legs
- Feet
Step 4: Assemble Top
Assemble the top as shown using:
- 2 Elbows
- 2 PVC Pipes 5'-0"
- 1 Coupler
Step 5: Assemble Legs
Assemble the Legs
Step 6: Assemble Feet
Place one elbow onto each of the 2'-6" pipes. Connect the other ends to the PVC Tee.
Step 7: Put It All Together
Put everything together:
- Top to Legs
- Legs to Feet
- Attach banner to Top
Stand up the display. If you haven't already turn the feet outward (90°) at the Tee creating a stable base.
NOTE: I recommend not tightening the joints between the legs and the feet (Tee) until after the display is upright.