Eugene 3D Model Shisa

by 2419hjis in Workshop > 3D Printing

437 Views, 1 Favorites, 0 Comments

Eugene 3D Model Shisa

Screen Shot 2021-12-13 at 12.23.14.png

This is how you can make the Shisa in tinkercad

Create Circes

Screen Shot 2021-12-13 at 12.15.58.png

In this step, you will need to create four different circles like the one in the image and align them together like this. Make them tallest to shortest from left to right.

ADD LAYER ON TOP

Screen Shot 2021-12-15 at 11.35.59.png

Copy and paste the circles from step one and align it in the same position. Extend the four circles upwards and move it back until it looks like this.

Add 3 Long Circles

Screen Shot 2021-12-15 at 11.40.00.png

Add three circles on the top of the four circles like this.

Create a Hole Block

Screen Shot 2021-12-15 at 11.44.35.png

Create a hole-square

Create a Hole

Screen Shot 2021-12-15 at 11.48.56.png

Group them and create this

Create Two Hole Blocks

Screen Shot 2021-12-15 at 11.57.47.png

Create two-hole blocks on the side

Group the Circles

Screen Shot 2021-12-15 at 12.10.34.png

Group them

Add Circle

Screen Shot 2021-12-15 at 12.12.03.png

add a circle on top of the foot

Add Long Circle

Screen Shot 2021-12-15 at 12.16.02.png

Add a long circle on top of the foot

COPY PASTE

Screen Shot 2021-12-15 at 12.19.26.png

Copy and paste the leg and rotate it to look like its the back of the foot

Do the Same With the Front Legs

Screen Shot 2021-12-15 at 12.21.19.png

Copy and paste the back legs into the front and make it smaller. You cant to rotate the long circle at the top to face upwards.

ADD Circle

Screen Shot 2021-12-15 at 12.26.18.png

Add a circle in the middle. This will be your bottom torso

Bottom Torso

Screen Shot 2021-12-15 at 12.27.34.png

Add another circle in the bottom torso. This is your upper torso

Add Circle

Screen Shot 2022-01-12 at 11.41.11.png

Create a circle and separate it from the torso it's sort of like an oval.

Add Nose

Screen Shot 2022-01-17 at 11.25.22.png

Add another circle on the face

Add Nostrils

Screen Shot 2022-01-17 at 11.33.02.png

Add two nostrils and make it transparent

Group Them

Screen Shot 2022-01-17 at 11.39.43.png

Group the two circles and create a hole.

Add the Mouth

Screen Shot 2022-01-17 at 11.43.02.png

Add another circle on the bottom of the face

Create an Invisible Circle

Screen Shot 2022-01-17 at 11.45.49.png

Group

Screen Shot 2022-01-17 at 11.52.43.png

Add a Circle

Screen Shot 2022-01-17 at 11.57.01.png

This will be the eye

Add an Invisible Circle

Screen Shot 2022-01-17 at 11.58.19.png

create a hole

Apply to Face

Screen Shot 2022-01-17 at 12.00.29.png

This is the eye

Eyebrows

Screen Shot 2022-01-17 at 12.02.13.png

Add two narrow circles on top of the eyes

Add a Another Narrow Circle Between the Brows

Screen Shot 2022-01-17 at 12.04.57.png

Create Circle With Dent

Screen Shot 2022-01-17 at 12.17.00.png

this will be your ear

Add Ears to Face

Screen Shot 2022-01-17 at 12.29.50.png

Finish It Ip With 7 Circles on the Side of the Face

Screen Shot 2022-01-19 at 11.45.48.png

ADD HEAD TO TORSO

Screen Shot 2022-01-19 at 11.48.30.png