Extra Hydraulic Mechanism Pack

Hello everyone this is Grayson Reid coming at y’all with another cool Ironman project. Ok let’s start

x1 Motorola SPN5435A case
x1 whole sheet of paper
X1 blue ballpoint pen
x1 grey marker
Tape
x1 paper clip
Wire cutters
Needle nose pliers
Pocket knife
Tiny screwdriver

I got the case at a garage sale for free I bet you can get it on eBay for like a dollar. The other stuff you should just have around your house

Now take your pocket knife and pop off the bottom of the case. After you do that in screw the little components inside. Then put the bottom back on after that take your paper clip and cut it about this size. Then you bend it as shown and put it in the 2 holes on the case. (Don’t forget to take the lid off before trying to poke it through!) almost done! Now take you paper and cut it to aprox. 2 centimeters tall and cut it off the short ways of the paper then color it with the blue on the inside and the grey on the outside. Roll it up as tight as you can and do that about four more times. Glue them into the empty compartment as shown.

Now add some tape to the back of the lid and the case and now you have a hinge. Well I hoped you liked this instructable, bye!!!!