"FAUX MAG WHEELS" - Lookin' Good (without Robbing a Bank)
by irishmail in Workshop > Cars
14608 Views, 73 Favorites, 0 Comments
"FAUX MAG WHEELS" - Lookin' Good (without Robbing a Bank)
The desire for a more contemporary look for my Volkswagen bug started a yearning for "Mag Wheels", or at least the look.
Hardly any cars sold today have hubcaps anymore, but the cost of a new set of rims to fit my VW was, ahem, staggering!
In this episode, I show how I transformed the (rusty) original German stock steel wheels into a much more presentable street appearance, at a minimal expense. My family claims that I had some sort of 'idea virus'.
Hardly any cars sold today have hubcaps anymore, but the cost of a new set of rims to fit my VW was, ahem, staggering!
In this episode, I show how I transformed the (rusty) original German stock steel wheels into a much more presentable street appearance, at a minimal expense. My family claims that I had some sort of 'idea virus'.
"MATERIALS & TOOLS"
The bug was non-operational for the last 21 years - the tires were rotted and the wheels were rusty, as you can see.
In the order they were used, are: (1) gray primer, (2) Krylon aluminum metallic, and (3) flat black.
A "wire wheel" that fits into a 1/4" electric drill was used to remove the flaking factory paint and any visible rust.
Painter's tape helped create the 'special effect'.
In the order they were used, are: (1) gray primer, (2) Krylon aluminum metallic, and (3) flat black.
A "wire wheel" that fits into a 1/4" electric drill was used to remove the flaking factory paint and any visible rust.
Painter's tape helped create the 'special effect'.
"PRIMER & BASE COAT"
The wheels were cleaned and dried after the rust and old paint was removed.
One coat of gray primer was sprayed and allowed to dry.
Two coats of aluminum metallic were sprayed, and allowed to harden for a few days.
Thinking that I would like the all-metal look, I had the tires mounted onto the wheels.
I was WRONG! They seemed way too bright, or maybe it was just the shock of seeing such a clean look.
One coat of gray primer was sprayed and allowed to dry.
Two coats of aluminum metallic were sprayed, and allowed to harden for a few days.
Thinking that I would like the all-metal look, I had the tires mounted onto the wheels.
I was WRONG! They seemed way too bright, or maybe it was just the shock of seeing such a clean look.
"MASKING" - to Spray Flat Black Areas
CAUTION: Be REALLY sure that the aluminum paint is hard. If it isn't, the tape will make quite a mess, guaranteed.
On each wheel, painter's tape was applied to create FOUR 'blacked-out' areas. Each area includes two original wheel slots.
These black areas create the illusion of (A) a round mag center with 4 mag 'spokes', which are connected to (B) an outside mag rim.
This illusion is enhanced by either squinting a little, or viewing from further away.
On each wheel, painter's tape was applied to create FOUR 'blacked-out' areas. Each area includes two original wheel slots.
These black areas create the illusion of (A) a round mag center with 4 mag 'spokes', which are connected to (B) an outside mag rim.
This illusion is enhanced by either squinting a little, or viewing from further away.
"STREET APPEAL"
Finally, the wheels were torqued on with zinc-plated lug bolts, and we were ready for prime-time.
I am satisfied with how these fake mags look, out on the road or in traffic.
I don't think there's any reason to use locking lugs.
After its first full-service car wash in 21 years, it's portrait time. SMILE !!
(The car wash cost more than creating these "Faux Mag Wheels").
I am satisfied with how these fake mags look, out on the road or in traffic.
I don't think there's any reason to use locking lugs.
After its first full-service car wash in 21 years, it's portrait time. SMILE !!
(The car wash cost more than creating these "Faux Mag Wheels").