FOLLOW ME ROBOT

by BHARATMOHANTY in Circuits > Robots

2936 Views, 8 Favorites, 0 Comments

FOLLOW ME ROBOT

Parts you need

1.transistor switch circuit.

2. Two ir sensor pair for each channel

3.battery

4.our diy robot chassis

10.png

hi welcome to the third part of five part robot series.
this is the same transistor switch circuit that i have used in LIGHT FOLLOWING ROBOT AND LINE FOLLOWING ROBOT i didn't change anything from previous build

11.png

we just need to reposition the sensors

12.png

this is the circuit diagram.here you can see all connections.just swap motor connections.

13.png

time to assemble circuit board on our diy robot chassis

14.png

i am using a cardboard piece to hold sensors

15.png

Test it if needed adjust variable resistor. And enjoy.