Fab-House (a Modular Open Source House Made From Cnc-cut-parts)

by fablabkamplintfort in Outside > Backyard

27479 Views, 228 Favorites, 0 Comments

Fab-House (a Modular Open Source House Made From Cnc-cut-parts)

P1099234.MOV.12_12_28_02.Still001.jpg
FabHouse Kamp-Lintfort

The FabHouse, is generally inspired by the tiny house movement and in particular by the Wikihouse and the Earthships, which favors not only environmentally friendly and affordable living but also a natural life and democratic house building.

The FabHouse was made in an interdisciplinary course at Rhine-Waal University of Applied Sciences in winter term 2017-2018 by the people of FabLab Kamp-Lintfort. We developed an open source self-sufficient house that can be reproduced in any of the >1400 Fab Labs worldwide and be deployed anywhere in the world. This vision is taken from the WikiHouse-Project, which “endeavors to democratize and simplify the construction of sustainable, resource-light dwellings“. However, the focus of this course was to not to simply copy it but to ‘Re-Think it’, driven by the goal of making it as sustainable as possible. This included not only the construction of the house and materials used but also energy harvesting and management systems.

More details about the project can be found here.

Decide Your Space

for karsten.jpg
1.jpg

The Fab House construction system is based on three modules: Middle, corner ('cake') and the key module.

Key modules link all other modules and provide columns to carry the roof. Corner modules can be mirrored, construction-wise. Middle parts are used to stretch the space in whatever size you have in mind. All modules are growing around the core.

The modular structure of rectangular and cake-like-pieces enable the house to grow and shrink, according to the users’ needs. If more space is needed, even after the house has been finished, it can be extended at any time by just removing one of the outer walls and by attaching one of the preferred modules. Shrinking takes place in a reverse way.

  • The smallest combination of modules would be with 3 modules (one middle, two corners, and one key element).
  • Corner provides 1.5 m²
  • Middle provides 2.7 m².
  • The smallest combination would provide you 5.7 m².

Design Your Tiny House

3.jpg
2.jpg

With the modular technique, you can design your own space.

As an example, you can see a half-size-doughnut plan of a house in the image above.

  • Please download the FabHouse Sketchup-file.
  • You can download house interior components from Warehouse 3D if you like to play a bit.

Understanding the Technique

exploded 2.jpg
IMG_2424.jpg
IMG_8084.JPG

Fab-house is made out of 18mm thick OSB wood. You can simply make it from any 18 mm material which can get and cut with a CNC router. This tiny house can produce by anyone who has access to a proper CNC machine. The cutting files can be arranged according to the size of the machines workspace (machine bed).

  • Decide on your material and its size. The bigger the machine bed, the easier to create many parts at a time.
  • In your DTP/CAD-Software, place the pieces to cut according to your material sheet template.
  • Likewise, you can see how much wood sheets you will need.
  • Order your material and enjoy cutting.

The Foundation

1.jpg
3.jpg
4.jpg
IMG_2475.jpg
IMG_2488.jpg
IMG_2490.jpg
IMG_2546.jpg
IMG_2549.jpg
5.jpg

The manual provided describes the assembly of the house in detail. Plan ahead and prepare the base for your construction. You need a balanced fundament or structure made of beams to place the ground sheets of the house. We used we used styrofoam which turned out to be quite effective. It is easy to handle and as a side effect, it inhibits the moisture from the soil. We dug into the soil and placed a layer of sand, leveled it and put the styrofoam on top of it.

Here you can download the Fab house assembly manual.

Basement Pieces

6.jpg
IMG_8430.JPG
IMG_8414.JPG
3.jpg
6.jpg
4.jpg
5.jpg

Before pouring the bulk insulation you have to complete these steps for the basement. You can use some brackets for the first step.

Basement Insulation

IMG_8424.JPG
IMG_2770.jpg
31052343_1928005703890656_3655636589079429120_o.jpg
8.jpg
7.jpg
IMG_2774.jpg

Then you can pour the bulk insulation to the basement and after that, place the ground floor sheets. (Hint: try to place the ground floor sheets temporarily, to make sure all alignments are correct)

Structure

13.jpg
IMG_2783.jpg
IMG_2792.jpg
IMG_2798.jpg
IMG_2801.jpg
31052377_1928004763890750_8678934427566342144_o.jpg
31084241_1928006350557258_3547259029304639488_o.jpg

You should follow the rest of the manual to build the FabHouse.

Walls and Roof

14.jpg
IMG_8643.JPG
IMG_8632.JPG
15.jpg
IMG_8621.JPG
IMG_8622.JPG

After having completed the base structure, you should apply the outside sheets for the walls, before applying the insulation material from the inside. We also recommend placing the roof sheets first.

Wall Insulation

31131061_1928005887223971_3925407006814371840_o.jpg
31108356_1928006193890607_7634053306326712320_o.jpg
IMG_8764.JPG
16.jpg

We used wood wool for insulation (80mm thick, 135 x 57.5 x 8 cm). This is a standard size but can easily be cut to whatever size you need.

House Wrapping

31081667_1928015827222977_4327031168189857792_o.jpg
31084291_1928015813889645_7154447618486042624_o.jpg

House wrapping is essential if you want to live inside the house :). Because of any possibility of water leaking into the OSB material, can cause fatal damage to its structure. Before covering it with larch wood, we put an extra layer of vapor diffusion open underlay foil.

Applying the Metal Roof

31059611_1928015603889666_2212547557811290112_o.jpg
31048414_1928015587223001_7629319526517047296_o.jpg
31062146_1928015773889649_8065975240750006272_o.jpg

Onto the OSB on the roof, we used the same vapor diffusion open underlay foil to cover it. On Top, we placed some beams which were used as the base structure for the profiled sheets (metal). In our case, the roof was sponsored by a company named Siegmetall. You may find similar products in your area.

Mounting Windows and the Door

IMG_3225.jpg
IMG_3226.jpg
IMG_3609.jpg

We bought wooden windows for the house in the proper size. They could easily be placed in the openings and have been screwed onto the frame after they were properly aligned. The same was done with the frame of the door.

Applying the Larch Wood

32474119_1955235154501044_6841680304625680384_o.jpg
32149307_1949511711740055_8237715697128439808_o.jpg
32157219_1949511811740045_3370620278689234944_o.jpg

To cover the walls and to make it long lasting, we used larch wood which we applied line by line onto the outside walls. We placed some beams beforehand because this creates extra space for air ventilation.

Happy Living

IMG_3842.jpg
IMG_3844.jpg
IMG_3846.jpg
P1099235.MOV.12_15_28_24.Still001.jpg
P1099235.MOV.12_16_22_18.Still002.jpg

Enjoy a sustainable housing :)