Fast N Furious Bicycle Helmet

this is a silly bicycle helmet inspired by fast n furious

Essential :

• cardboard
• ruller
• cutting knive
• glue or glue gun (works better and faster)
• acrylic black paint
• helmet

Optional:

• cutting mat
• paint of your choice

measure and cut a rectangle (15* 6 cm for the bottom part)

i put two parts so that it is a little stronger

cut a smaller rectangle (15* 3 cm for the top part)

glue them together

fin1:

• use the main body for measurments
• draw your design based on the measurments
• cut it out.

Fin 2:

• use fin 1 to draw the second fin as they need to be symetrical
• cut it out as well (carefully)

glueing fins to main body

• put them in the order as shown in the picture
• stick the first one on the height you want
• when its dry glue the other one (they should be on the same height as they are copies of each other)

• take 4 pieces of cardboard of the same size
• glue them togeter so you end up with 2
• draw and cut a brachet
• use the cut out to draw and cut the second brachet

when its done use glue gun or glue to stick it together to the main body

use acrylic paint to cover it

with the glue to stick the spoiler to the helmet