Filling Bottles Off Krups Beertender

So this instructable is dependent on this one: https://www.instructables.com/id/Krups-Beerteender-...

I was looking for away to fill either bottles or growlers off my little Beertender. Just using the regular spout I would get a good deal of foam, and this is the very simple and very effective solution I came up with.

Stick however many bottles you want to fill in the fridge, and let them chill about 30 minutes. This reduces foam

It just unscrews, just like you do for cleaning.

Cut a piece of 5/16" to length, I didn't measure mine...I just eyeballed it.

But as you can see, it fits snugly over the end of the internal faucet

Its as simple as it sounds: Turn the air off, put the tube in the bottle and open the tap.