Final Project Step 1 Grill Sub Assembly

by JeremyBraithwaite in Circuits > Software

1482 Views, 3 Favorites, 0 Comments

Final Project Step 1 Grill Sub Assembly

1.1.jpg
1.10.jpg

This is an opportunity to show what you know about Inventor. This is not intended to be a fully detailed instruction but more of a road map to get you started a give some direction. This is part 1 of a 6 part project. Please see the attached file for details.

Downloads

Grill Assembly Simplified.pdf

Model Grill Support.ipt

1.2.jpg

Create a new standard .ipt file and produce the model.

Create Grill Square Rod.ipt

1.3.jpg

Create a new standard .ipt file and produce the model.

Create Short Grill.ipt

1.5.jpg

Create a new standard .ipt file and produce the model.

Create Center Grill Support.ipt

1.6.jpg

Create a new standard .ipt file and produce the model.

Create Grill Handle.ipt

1.4.jpg

Create a new standard .ipt file and produce the model.

Create a New Weldment.iam and Assemble

1.7.jpg

Create a new Weldment.iam and use the proper constraints to assemble the grill assembly.

Create the Welds

1.8.jpg

Create the proper welds as indicated on the drawing.

Save the Assembly

1.9.jpg

Save the assembly to be used as a sub assembly in the future.