Final Project for Ddp

For my final project I used Fusion 360 and Inkscape.

Fusion 360, Inkscape, Chop saw, X-craver machine, Blow torch, Polyurethane,

On inskcape I made a line up 10 inches and then over 20 and connected it together and made into a piece of wood by excluding it and changing the appearance to pine.

For my piece of wood I used pine and my dimensions were 10 in height and width was 20 inches.

For this step we used the big blow torch to burn the wood in a cool pattern.

In this step we used the X-Carve machine to carve my dads name in the wood and what I wanted to say under his name.

In this step I put polyurethane on the wood so it had a nice finishing on it.

In this step we used this stuff called epoxy for finishing my project.

We used the heat gun to dry the epoxy so it would dry it faster than leaving it there.

We are done with the project now. It looks bussing bussing.