Fix, Splice, Repair Garden Hose

 I needed a lot of garden hose so lay out a drip irrigation system.  So on junk day i searched around for used garden hose and found a lot of it most of what i needed i found in the trash.
   So what you need is some pipe a hack saw, and two zip ties.
 I just happen to have a long piece of scrap metal pipe, and it just fit perfectly inside a garden hose, tightly.  Cut off a pices about 3 inches long.  And twist it into one of the hose ends, then do the same with the other end.
    Make sure its a tight fit and yourtwist them together as much as you can.   Then use the zip ties to tighten the hose around the metal pipe. And there you go!