Flashing Halloween Treat Basket

This is very simple all you need is a Halloween Basket  (plastic)  1 Flashing L.E.D. colour of your choice 1 Watch Battery (CR2032) a Duct Tape, Clear Plastic cup, some Hot Glue (and Glue Gun) a 3/8 mm Drill bit ( for 5mm LED) and a Drill

Drill hole in the middle on the bottom of the Basket

Put hot glue on rim of cup and place it on the inside of the basket (centered) 

Now insert LED the long wire on the LED goes to the + on  the battery, insert the battery between the wires on the LED now bend them over so they are flat with the bottom of the basket, 

Now tape it to the bottom your done, Try different colour's of LED's and also different colour's of baskets, Hope you enjoy this