Floppy Disk Bank

by fatalgamer in Circuits > Computers

4787 Views, 9 Favorites, 0 Comments

Floppy Disk Bank

105_0058.JPG

store more then 1.44mb

Materials

105_0052.JPG
1. 6  3.5 floppy disk

2. small Flathead screwdriver

3. glue gun

4. razor bald

5. push pen

6. tape

Top of Bank

105_0057.JPG
step 1. remove the metal tab of the floppy drive

step 2. use the small flat head screwdriver to pry open the edges.

step 3. after it is opened up, remove the black disk around the metal circle.

step 4. reassemble floppy disk, make sure to put the spring back in so the bank would be able to close.

Bottom of the Bank

105_0054.JPG
step 1. disassemble floppy disk

step 2 . remove black disk and the metal circle

step 3. push the push pen threw the center of the circle then use the razor bald to cut out the circle, make it smooth to prevent cuts. (be careful with razor blade)

step 4. reassemble floppy disk

Floppy Disk Powers Go, Shape of a Box

105_0059.JPG
glue 4 floppy disk to the inner edge of the bottom disk, then glue the top on.
remove glue spider webs and cover the bottom hole with tape.

make sure not to glue the metal tabs.

(Be careful with the hot gun)

Every Penney Counts

http://www.youtube.com/watch?v=OovT3nZ1Vwc


slide back the metal tab to insert cash money!!!.