Flower Puzzle Box

This is a puzzle box that can be locked and unlocked by twisting the flowers into the correct pattern.

I took inspiration from SKM on Youtube.

• 0.115' thick wood (3 pieces of 23.5x11.5 dimensions, but could be squeezed into less)

cut out all of these pieces with a laser. (engrave flowers on a different layer)

AutoCad file is attached below

You may need to use glue when assembling the outer box.

• glue 6 sides to the inner ring and base (all pieces required are shown in the image above)

Using the pieces pictured above, assemble the locking mechanism by:

• glueing each flower piece to a rod
• securing it through the plank with 2 washer pieces
• attaching the semi circle stopper, securing it with another washer

Picture #1 = flower pattern Picture #2 = Side view of locking mechanism Picture #3 = Inside of the box/pattern of semi circle stoppers

Glue together the pieces for the inner box