Flower and Ammonia Patina on Copper

by creatinglinusonlineschoolofjewellery in Workshop > Metalworking

1285 Views, 10 Favorites, 0 Comments

Flower and Ammonia Patina on Copper

58a_edited_image_patina forming_clipped_rev_1.png
33_edited_image_patina forming_clipped_rev_1.png
13_patina forming_clipped_rev_1.png
63b_edited_image_patina forming_clipped_rev_1.png

Learn how to make a flower and ammonia patina on copper.

Introduction:

flowers

I’ve been having a lot of fun with household copper patinas. What’s a house hold patina? Generally a patina created using things found in the Home, rather than, patinas made with nasty Chemicals which are not always fun to play with.

I found to my delight that many materials both organic and non organic could be used to create very unique copper and ammonia patinas. I call these materials - reactive materials.

I also had to figure out how to use those reactive materials to create patinas. I came up with a few methods which offered many possibilities.

In this tutorial I’ll show you how to: Wrap, Tie and Drizzle.

What You'll Need:

IMG_6332_clipped_rev_1.png
  • Some flower petals.
  • An absorbent cloth (I used a microfibre dishcloth from the dollar store).
  • A bit of yarn or string.
  • A zip bag.
  • 2 teaspoons of household ammonia (from my local grocery store).
  • A piece of copper.

Copper Preparation:

11_onion.jpg
12_onion.jpg
13_onion.jpg

It is best to first degrease your copper, this will help the patina adhere to the copper and make it more stable (less likely to flake off).

There are a few ways to do this. I recommend emery. Use 220 emery by hand or a sanding disc with a rotary tool.

Be sure to emery the entire surface and do not touch the copper with your greasy fingers. I like to wear gloves, but if you hold the copper only on the edges, you’ll be ok.

Make It.

1_flowers.jpg
2_flowers.jpg
3_flowers.jpg
4_flowers.jpg
5_flowers.jpg
6_flowers.jpg
10_flowers.jpg
11_flowers.jpg
12_flowers.jpg
  • Pluck the flower petals. Make an petal, copper, petal sandwich.
  • Wrap the cloth around the sandwich evenly.
  • Tie securely with a bit of yarn or string.
  • Drizzle 2 teaspoons of ammonia evenly, a bit on both sides of the cloth.
  • Pop into a zip bag and let cook (sit) for 4 days.
  • Remove from zip bag and soak in warm water for about 10 minutes.
  • Open up the cloth and gently remove the flower petals.
  • Allow to fully dry.
  • If the patina is chalky, gently wash in warm water.


Be careful not to inhale the ammonia fumes as they can be harmful. And do wear protective eyewear - the fumes can damage your eyes.

Learn More Ammonia and Copper Patina Recipes.

119b_edited_image_patina forming_clipped_rev_1.png
130b_edited_image_patina forming_clipped_rev_1.png
133a_edited_image_patina forming_clipped_rev_1.png
157a_edited_image_patina formong_clipped_rev_1.png
173_edited_image_patina forming_clipped_rev_1.png

If you would like to learn more patina recipes using organic and non organic reactive materials, please visit My Facebook Page or YouTube Channel.