Follow a Route Marked With Two White Lines (Zybo-Zynq 7000 ARM/FPGA)

This is the first part of the project aiming at identifying and maintaining direction of travel at car between the two white lines on the road.

Hardware:

· MRK Basic: Motor Robot Parts Kit (Does Not Include Microcontroller)

· A Zybo Zynq-7000 ARM/FPGA SoC Trainer Board

· 6v battery

Software:

· Xilinx Vivado 2016.X

o Vivado 2016.3 is used in this tutorial

For more helpful: https://reference.digilentinc.com/_media/motor_robot_kit_basic/mrk-basic_rm.pdf

Follow the instructions step by step from the link below:

Now the car goes only :)