Form of a Gear With Fiberglass
by yazdanian1 in Workshop > Tools
1377 Views, 7 Favorites, 0 Comments
Form of a Gear With Fiberglass
hello dear
Learn all the steps in the format file POWER POINT placed
God willing
In the future the gear slicing method
With CNC machine
And training
I will upload the full
i hope
You find it interesting.
Comment
Do not forget to
Thanks for when visiting
good bye
1. resin + colbat = color = pink and properties=Gel
2. Acid + 1 =color = Dark green properties= Du
3. Add up Article To Template( Clay+water( The dough),,or,,Thick plastic Metal
And any material that does not react with it.
4. add up fiber glass Sliced
5.3/5 hour until Drying
Tips!!!!!!!
The liquid must be poured into the mold
Not coming out!!
Mold surface prior to injection
Should be fatty
With
Grace
Or liquid oil!!
You can get a solid piece
After the fiberglass layer
Again
Enter the hybrid solution!!
In working with acid be careful!!!
The exact proportion of female
In the eye
Better to be specific colors!!
The role provider is accelerating the acid.
If too much is poured
The fragile
Than it note..?!
To use thin layers of acid more..!
Article after a few hours
Becomes dry
Try to be earlier used...!
And I add the rest later
Sincerely
Downloads
finish