Forstner Bit / Spade Bit Holder and Display
by pat42586 in Workshop > Tools
3840 Views, 28 Favorites, 0 Comments
Forstner Bit / Spade Bit Holder and Display
If you're like me, you don't like you're tools away in a case, you want them out and visible and grabbable. So when I finally got a forstner bit set, I figured I'd make a quick and easy display for them and some spade bits.
It's really easy, two 16.5x2.5x3/4 pieces and one 16.5x1.5x3/4 piece of scrap, lay down your bits first to get the spacing right, and drill holes in the top piece.
Glue the pieces together and it will sit on your table like that or you can screw it to the wall like I did.
Hope this helps!
It's really easy, two 16.5x2.5x3/4 pieces and one 16.5x1.5x3/4 piece of scrap, lay down your bits first to get the spacing right, and drill holes in the top piece.
Glue the pieces together and it will sit on your table like that or you can screw it to the wall like I did.
Hope this helps!