Frankendrill IV: the Resurrection

I recently purchased a well made cordless model from a thrift store with the objective of converting it to my favorite type of power pack: the Harbor Freight 18- volter. It was an obsolete design, and the 14 volt battery unit was no longer readily available. An inspection showed it probably suffered the same fate as many portable drill systems do: sitting on a shelf while the battery gets dried out in the charger. With no discernible signs of wear or abuse, it was a perfect specimen for my mad experiment.

The corpse of an old Harbor Freight drill provided the body parts I needed for my experiments: the battery connector and the all important electrodes. I severed the limb from the torso using my bone saw, saving the heart, head, and lungs for another day.

I made a paper pattern for the acrylic transition plate that would allow for the new battery to interface with the old drill. I then fabricated a wood plug to hold the electrodes that would connect to the drill's interior socket. I finished this part of the operation by screwing the plate in place, and provided connection screws to direct power to the body. Lastly the new connector was epoxied and screwed to the plate, I then removed my mask, apron, and gloves...

Look! It's moving. It's alive. It's alive... It's alive, it's moving, it's alive, it's alive, it's alive, it's alive, IT'S ALIVE!

Well, I wasn't as overawed as Colin Clive, but still, it's a pretty good feeling to see an experiment turn out successfully just the same. Now I have another tool ready to do my bidding in my quest for total world domination, one screw at a time.