Funky Shoes
These shoes are made from 11 1/2" doll shoes. A girl cannot wear enough shoes if she only has two feet.
Step 2. Collect Tools:
-Small jewelry pliers
-Small jewelry round nose pliers
-Small wire cutters
-Small needle
-Large needle
-Small jewelry round nose pliers
-Small wire cutters
-Small needle
-Large needle
Step 1. Collect Materials:
-Small shoes (from any 11½” doll such as Barbie”
-Beads (any beads, use your imagination)
-Ear wires
-Eye pins
-Jump rings
-Beads (any beads, use your imagination)
-Ear wires
-Eye pins
-Jump rings
Step 3, Piercing Hole in the Shoe
Step 3 a: Pierce a hole in the pack of each shoe with a small needle.
Step 3 b: Enlarge the hole with the large needle (if difficult, heat the end of the needles before piercing).
Step 3 b: Enlarge the hole with the large needle (if difficult, heat the end of the needles before piercing).
Step 4. Assembling the Shoe:
Step 4a. Slip jump rings through each hole of each shoe.
Step 4b. String beads onto the eye pins.
Step 4c. Cut excess wire if using less beads and leave a little bit is wire to curl.
Step 4d. Curl the end of the wire to make another eye.
Step 4b. String beads onto the eye pins.
Step 4c. Cut excess wire if using less beads and leave a little bit is wire to curl.
Step 4d. Curl the end of the wire to make another eye.
Step 5 Finishing Shoes
Attach one end of stringed beads to the jump-ring that is attached to the shoe and the other end to the ear wire.
Here It Is
Presto, now you have a pair of funky shoe earrings.