Fusion 360 CAD Basics
by Pulkit Aggarwal in Workshop > 3D Printing
1073 Views, 6 Favorites, 0 Comments
Fusion 360 CAD Basics
This Instructable will walk you through the process of designing in Fusion 360 from very basics. In the Fusion 360 CAD Basics Tutorials, we will start from basic models and learn about sketching. Then we will learn about Solid creation tools such as Sweep, Loft, etc. Then we will learn about Surfaces and Sheet Metal in Fusion 360. And finally, we will learn about Components, Joints and Assemblies.
All the links for the Drawing Specifications are provided for each Tutorial.
Tutorial 1
In this Tutorial, we will learn about basic Sketch Parameters.
Specifications(Tutorial 1) -
https://drive.google.com/open?id=10pPLJoyzfPTDJfUGB7Ozz8xsficGrwtd
Tutorial 2
In this Tutorial, we are going to create a model based on given parameters.
Specifications(Tutorial 2) -
Tutorial 3
In this Tutorial, we are going to create a model based on given parameters.
Specifications(Tutorial 3) -
Tutorial 4
In this Tutorial, we will be using basic Extrude Features and create a model based on given parameters.
Specifications(Tutorial 4) -
Tutorial 5
In this Tutorial, we are going to learn about Offset Planes and create a model based on giving specifications.
Specifications(Tutorial 5) -
Tutorial 6
In this Tutorial, we are going to learn about 3D Sketching, Sweep Command and create a model based on given parameters.
Specifications(Tutorial 6) -
Tutorial 7
In this Tutorial, we are going to learn about Sheet Metal operations and create a model based on given parameters.
Specifications(Tutorial 7) -
Tutorial 8
In this Tutorial, we are going to learn about SURFACE operations, SHEET METAL operations such as Flange and create a model based on given parameters.
Specifications(Tutorial 8) -
Tutorial 9
In this Tutorial, we are going to learn about Components, Joint and Assemblies and create a model based on given parameters.
Specifications(Tutorial 9) -
Tutorial 10
In this Tutorial, we are going to create different parts, convert them to Components and Assemble them together and create a model based on given parameters.
Specifications(Tutorial 10) -
Tutorial 11
In this Tutorial, we are going to Assemble the parts given to us (Apply different types of Joints) and create a model based on given parameters.
Specifications(Tutorial 11) -
https://drive.google.com/open?id=1nKTRfZsxrhL71Q8i...
Components - ( ZIP File )