GE Microwave F3 Error Fix

by mantis22 in Circuits > Electronics

79721 Views, 6 Favorites, 0 Comments

GE Microwave F3 Error Fix

0.14930003699387506IMAG0806.jpg
microwave tuns on by it's self,beeps out of control

starts cooking by itself

f3 is a control panel error

this is what I did

haven't had an error yet on week 2

Remove Top Grate

0.410021638353151IMAG0808.jpg
remove the two screws holding in place
you have to open the door to get it to come off

Remove the Control Panel

0.6351812585449904IMAG0799.jpg
0.8934585767424449IMAG0803.jpg
0.6680926302012761IMAG0804.jpg
Remove screw holding panel on
Then with your hand push up from the bottom to get it to come off

Clean the Control Board

0.5825073035107159IMAG0805.jpg
I looked ovsd the board and there was some corrosion that was making contact on board. Cleaned that off and any grease.

Has been working for over a month saved $80.00

Hope this helps u out

Put It Back Together

Replace all things U removeed and plug back in