"Ghillied Up" How to Make a Ghillie Paintball Gun

A cheap and simple (and time-consuming) Ghillie Suit for your Paint-ball marker.

*^disclaimer I am not held responsible for any string related injury inflicted on you or others*

You need

#1 Paintball marker

#2 Cotton string

#3 Electrical tape

#4 Scissors

#5 Barrel cleaner

#6 Spray paint

*not pictured* *optional* #7 Masking/Painters tape

First, unscrew the barrel (lefty loosey, righty tighty)
Next, run hot water through the barrel
Third, wipe it down wit a paper towel
Fourth, use the barrel cleaner to well... clean the barrel
Finally, press the next step button at the bottom of the screen

Take the electrical tape and start wrapping the barrel starting at the tip. When completed, put it back on the marker and see if it fits. If not, then trim it, it must fit perfectly.

This step is completely optional, do it for extra safety. Take your packing tape, and wrap up the important/open areas of the marker. Parts like the barrel, cocking mechanism, paintball feeding tube, trigger, CO2 tube, and CO2 nozzle.

Remove the barrel and get your black, gray, and green spray paint. Paint it black if its colored, if its black than there is no reason. Next, paint it spotted or striped. Let it dry, screw on the barrel, and marvel in its beautiful presence.

Cut approx. 20 pieces of string 20" long. Tie in a simple knot and unravel. In an hour you get the last picture.

Remove the barrel and put it on the barrel cleaner. Spray the whole thing green, the tips black, and frost the center gray. Let it dry and re-attach. 'tear-drop' "its beautiful"

Put on you Ghillie Mask, equip your Ghillie Gun, and start tagging.