Ghosbuster EL Wire

by lpxav in Circuits > Electronics

2108 Views, 7 Favorites, 0 Comments

Ghosbuster EL Wire

Ghosbuster EL wire.jpg
what you need.jpg
it lights.jpg
it shines.jpg
like that.jpg
like that2.jpg
mark contour with pencil.jpg
then cut the line.jpg
then insert the el wire in the cutted hole.jpg
then paint in white the cardboard to have a nice glow finish.jpg
then re-insert the el wire in the pre-cutted hole.jpg
then re-insert the el wire in the pre-cutted hole2.jpg
This TINK is a Ghostbuster lighting with one EL wire cable!!!!

It is really easy to do with no need to have any special skills!!!

Follow steps if you want to do it or modify it with an other model than Ghosbuster logo.

So enjoy and try it!!!

What Do You Need?

what you need.jpg
then cut the line.jpg
You will need:

-1 x piece of thick cardboard (I found it in a bin)

-1 x EL wire cable of 1 meter (bought in ebay for 3 €)

-1 x Ghosbuster logo (Printed on my old color printer)

-1 x good cutter

-1 x pencil

- some paint

That's all

The Shape

mark contour with pencil.jpg
like that.jpg
then cut the line.jpg
Mark the shape with a pencil and then pre-cut it with the cutter

EL Wire Insertion

then insert the el wire in the cutted hole.jpg
like that2.jpg
Pre-insert the EL wire in the ghost shape in order to facilitate the final insertion after painting.
It will also pre-form your EL wire!!!

Painting

then paint in white the cardboard to have a nice glow finish.jpg
Simply paint the cardboard to obtain a nice white glow finish!!!

EL Wire Final Insertion

then re-insert the el wire in the pre-cutted hole.jpg
then re-insert the el wire in the pre-cutted hole2.jpg
it lights.jpg
Take care about well insert the EL wire in the cardboard just to the surface!!!

It Is Finished

it shines.jpg
Ghosbuster EL wire.jpg
Just paste the logo with regular glue and it is done!!!!


Simple isn't it!!! :)