Ghost in a Jar

by mattvr0826 in Craft > Mason Jars

2979 Views, 16 Favorites, 0 Comments

Ghost in a Jar

title.jpg

This Ghost in a Jar is a wonderful way to add a little spooky, seasonal ambience to your (not so) haunted house. This project requires no crazy materials, no technological know-how, and only an afternoon of family fun and crafting!

Supplies

  • 1 plastic mason jar
  • 1 electric tea light
  • 2 large cotton balls
  • 1 sheet of white paper
  • 1 sheet of brown paper
  • A few feet of twine
  • Aluminum foil
  • Pair of scissors or hobby knife
  • Hot glue gun
  • Extra glue
  • Black paint & paintbrush
  • Black pen
  • Black marker
  • Candle & matches
  • 1 (old) knife
  • Some Halloween spirit!

Build a Ghost!

ghost.jpg

  1. Lay out your two cotton balls
  2. Slice one in half, and mold part of the fuzz into a cone
  3. Hot glue the cone to the remaining cotton ball, shaping the cone to look like part of the ball
  4. Use a marker to color a pair of eyes
  5. Cut out the eyes and glue them onto your ghost!

Get the Jar Ready!

IMG_4396.jpg
IMG_4397.jpg

  1. Bring your candle, jar, and an old knife outside, or somewhere with good ventilation
  2. Heat the knife over the candle (be careful!)
  3. Carve a hole into the bottom of the jar (like a jack o' lantern!)

Decorate Your Ghost's New Home!

IMG_4400.jpg

  1. Paint a 1.5 in. strip along the top & bottom of the jar with black paint
  2. Cut a strip of brown paper that can cover the rest of the jar
  3. Cut a small hole (about 2 in. wide, and 1.5 in. tall) towards the top of the strip
  4. Glue the strip to the jar

Add Some Flair!

IMG_4412.jpg
IMG_4413.jpg

  1. Cut a length of twine to wrap around the jar's rim
  2. Finish it off with a bow!

Back to the Ghost!

IMG_4415.jpg
IMG_4416.jpg
IMG_4417.jpg

  1. Hot glue your ghost to the top of the electric tea light
  2. Wrap a small piece of aluminum foil around the light (This should make the light just a bit too thick to fit in the hole you carved in the jar!)
  3. Hot glue the foil to the light for stability

Welcome Home!

IMG_4420.jpg
IMG_4418.jpg
IMG_4421.jpg

  1. Gently place the ghost and light into the jar
  2. Balancing the ghost inside, carefully glue it in place through the hole you carved earlier

Details!

IMG_4425.jpg
IMG_4423.jpg

  1. Using black paint and a brush, decorate the paper!
  2. I painted some scraggly trees and spooky clouds, but anything goes!

A Finishing Touch

IMG_4426.jpg
IMG_4427.jpg

  1. Cut out a small tag from your sheet of white paper
  2. Decorate the tag! You could write your ghost's name, or a spooky warning like I did!
  3. Use a dab of hot glue to attach it to the jar!

Light It Up!

IMG_4428.jpg
IMG_4433.jpg

  1. You've worked hard-- now you can sit back and enjoy! Turn on your ghost and put him somewhere spoooooky!