Glowing Utility Cart
Hello, This is Bryan from the ElementalLED.com shipping department. My goal is to light up the underside of my utility cart with LED's activated via motion. I am hoping that when I am done, the cart will look like it is hovering above the ground when it is covering ground quickly.
Materials Used:
Waterproof LED Light Bars
LED Light Bar Adapter Cable
DC Plug 1 Meter Extension Cable
DC LED splitter cable
12 Volt Motion Sensor Switch
Rechargeable Li-ion Battery Pack
Materials Used:
Waterproof LED Light Bars
LED Light Bar Adapter Cable
DC Plug 1 Meter Extension Cable
DC LED splitter cable
12 Volt Motion Sensor Switch
Rechargeable Li-ion Battery Pack
Attach the LED bars. The Waterproof LED Light Bars come with clips that just screw in but I chose to not drill and just use double sided tape instead to mount the lights.
Next, I ran the wiring as nice and neat as possible. I am wiring the lights together with a 3-way splitter, then attaching and mounting an inline motion sensor as my switch.
The motion sensor is then just connected directly into where the battery pack is stored. This is the battery pack that I used but the power source can be anything you want. Here is a picture of the cart finished.