Graduation Party Favors

INTERNET WEBSITE

you need:

-ruler

-pencil or pen

-cardboard

-corrugated and black cardboard

-smooth and black cardboard

-compass

-scissors or cutter

-hot glue

-gold wire

-tempera

-brush

with the compass, draw two circles on the cardboard: one for the base (4.5 cm diameter) and one for the hat (5.0 cm diameter)

cut the cicles with a cutter

draw on the cardboard (corrugated and black) two strips: one of the dimensions of 18x4 cm (for the base) and one of the dimensions of 18x2 cm (for the hat)

cut the strips

take the strip of 18x4 cm size and paste it around the cicle of the base (4.5 cm of diameter) with the hot glue

take the strip of 18x2 cm size and paste it around the cicle of the hat (5.0 cm of diameter) with the hot glue

paint with black tempera the inside of the base and the hat, and also the underside of the base

cut a square (8x8 cm size) on a black and smooth cardboard

pierced with the tip of the compass the hat square just made

take the golden thread and make thirteen laps around the palm of your hand; cut the wire leaving some leftovers

make a knot with the two ends of the wire

cut another piece of gold wire of 30 cm length

take the wire just cut and tie it to the previous as in the pictures

cut the tassel

pass the two ends of the tassel inside the square hole of our hat

with the hot glue, paste the square on the base

take a sheet of A4 format; soak the paper in a bowl containing coffee diluted with water

let it dry;

rip pieces of paper the size that interests us and burn the edges with a lighter

take a piece of resistant wire and attach it with hot glue on the base of the hat

Looping the parchment to the wire