Green LED Dot Matrix Electronic Clock With Music Spectrum Display Soldering Project

by ICStation in Circuits > Clocks

204 Views, 2 Favorites, 0 Comments

Green LED Dot Matrix Electronic Clock With Music Spectrum Display Soldering Project

1.jpg
未标题-1.jpg
3.jpg

This soldering project is about a DIY Electronic Clock kit with 18 LED Spectrum Effects. It automatically display the music spectrum when there is sound; Display the current time when there is no sound. Users can choose to switch between 18 music spectrum display modes and so on.

This is a really good intermediate kit, especially if you want to try a few surface mount components. This kit has a great variety of component mounting styles. It also has two ICs and a few capacitors that are surface mount to test your skills.

Features:

  • SMD SOLDERING KIT: DIY spectrum clock soldering kit primarily adopts a SMD design. Due to the small pin spacing of some components, assembly requires patience and soldering experience. The challenging assembly process not only provides the joy of DIY but also serves as an excellent opportunity to hone soldering skills.


  • SIX-DIGIT CLOCK: Features a six-digit display, providing enhanced accuracy in timekeeping. Additionally, it supports a switch between 12-hour and 24-hour formats, catering to your diverse preferences. Its minimalist design allows for seamless integration into various settings, making it a unique and stylish decoration for any occasion.


  • 18 SPECTRUM EFFECTS: Supports 18 spectrum effects and is equipped with a microphone module. When sound is detected, the clock automatically switches to spectrum mode, showcasing vibrant light effects. Once the sound stops, it seamlessly returns to normal clock display. You can personalize the transition time according to your preferences, turning the clock into not just a timekeeper but a perfect blend of music and visual spectacle.


Install 1pc SMD Components LQFP32 STC8H1K16-36I Controller at U1

1.png

Please pay attention to the installation direction of STC8H1K16 Chip. There is a small dot mark on the corner of IC, a gap mark and white dot on PCB silk screen where the IC can place on.

Randomly Choose a Pad on the Pcb and Then Melt the Solder on This Pad.

2.png

Fix STC8H1K16

3.png

Connect Others Pad on STC8H1k16 by Tin and Soldering Iron

4.png

Install 1pc SOP-8 DS1302 Clock IC at U2

5.png

Install 2pcs 22pF 0805 SMD Capacitor at C3, C4

6.png

Install 1pc 0.1uF 0805 SMD Capacitor at C2

7.png

Install 1pc Microphone Module and Align Each Pad

8.png

Install 1pc 32.768 KHz Crystal Oscillator at Y1 in Horizontal

9.png

Install 1pc 2Pin Mirco USB Socket

10.png

Install 1pc SMD Black Button at SW

11.png

Install 1pc CR1220 Battery Socket

12.png

Install 1pc 1000uF Electrolytic Capacitor at C1 in Horizontal

13.png

Install 1pc 5Pin Mirco USB Socket

14.png

Install 8x8 Dot Matrix Screen

15.png

Screen printings are used to determine direction. Please refer to the attached pic.

Install Other 8*8 Dot Matrix Screen by the Same Direction

16.png

Install 1pc CR1220 Battery

17.png

Note: the positive electrode of the battery contacts the metal spring of the battery holder.

Tear Off the Protective Film

18.png

Stick the Fliter Film Onto the Surface of the Dot Matrix Screen

19.png

Video Demo

Dot Matrix LED Clock Kits + Music Spectrum Display

Kit includes everything you need to build an electronic clock with spectrum effects! The finished clock will be a good addition to your collection of digital timepieces. Very relaxing project. They are fairly easy as far as surface mount goes, you will want some tweezers for the smaller ones. Ready to start building? Click here to get your clock kit from us!