HARD DISK COVER USING LEFTOVER WEDDING CARD

season of indian weddings as it is ...u can use it to make a complete diy hard disk cover or almost any cover

*scisors

*scale

*glue

*pencil&eraser

*of course a wedding card

i had a one with cardboard material inside.... so it made it a lot easier...if its a simple sheet get an adition cardboard

**separate the cardboard and inner and outer coverings form the card

**it will end up in three sheets or layers

***i have now taken two layers ..one of cardboard and other of the outer covering

***now take the measurements of the disk or whatever you are making

***take two separate sheets of outer layer and draw the measurements

***take some extra space of 1cm and cut as shown in the image along the extra 1cm u left

**now stick the cardboard on to the first layer which is cut according to the ACTUAL measurements of the disk(and the cable)(excluding the extra 1cm)

***i have also added a flap which i got from the inner layer

*** stick together the two halves using the extra space u left using a gum

use a double sided tape to keep the flap in place and enjoy your diy