Half Life MetroCop Costume Part 1 (Weapons)

This is the first part of the series where I will show you guys how to make a half-life MetroCop costume cosplay.

-PVC Pipe .8 inches wide

-plastic glue

-black/orange paint

-3D printed parts: Click Here

-3D printer (To print parts)

Cut a piece of the PVC pipe that is about 12 inches long. Now Apply glue to the bottom of the PVC pipe and attach the bottom piece.

Now mark out a line about 4 inches from the bottom for the handle part to fit then apply glue and slide the piece onto the pipe so it is on the line.

Now apply glue to the top of the pipe and stick the final piece down.

Wait 24 hours for the glue to dry for best results.

Now spray-paint the whole thing black and wait for it to dry.

Now that the paint is dry, paint the little bumpy rods on top an red-orange color (I used a glow in the dark paint but this is optional) paint and wait to dry.

- FINISHED

Complete series: